How much mulch do I need?
Multiply the bed in square feet by the depth in inches and divide by 324. At 3 inches, one cubic yard covers 108 square feet. A cubic yard is 27 cubic feet, which is 13.5 bags of 2 cubic feet or 9 bags of 3 cubic feet before rounding up.
How do I use this mulch calculator?
- Enter the length and width of the bed, or a circle or triangle if that matches the shape.
- Enter the depth you still need to add, usually 2 to 4 inches, and keep mulch off trunks.
- Leave the allowance at 0 for a simple rectangle, or add 5 to 10 percent for curves. Results update as you type.
How deep should mulch be?
For trees and shrubs, a 2 to 4 inch layer is the range repeated across university extension publications. Penn State Extension says to apply 2 to 4 inches and no more, and to use less on poorly drained soil or with finely shredded mulch, which lets less oxygen through.Iowa Statesuggests 3 to 4 inches of wood chips or shredded bark on well-drained sites and 2 to 3 inches on heavy soil.Illinois Extensiontells you to keep mulch at least a few inches off the trunk.
More than about 4 inches can mat, stay wet, and send roots into the mulch instead of the soil. Piling it against the trunk, the “volcano,” keeps bark wet and hides the root flare. Spread the mulch outward in a ring, and leave the flare visible. Around small plants, stop short of the stems the same way.
If mulch is already there, measure it. Enter the inches you still need, not a fresh 3 inches on top of 3 inches that have not broken down. A rake through a crusted layer is sometimes the whole job.
How much ground does one cubic yard cover?
One cubic yard is 27 cubic feet. At 1 inch deep it covers 324 square feet. Divide 324 by the depth in inches.
| Depth | Coverage |
|---|---|
| 2 inches | 162 sq ft |
| 3 inches | 108 sq ft |
| 4 inches | 81 sq ft |
Bags follow the same 27 cubic feet. Nine bags of 3 cubic feet are one yard. Bags of 2 cubic feet come out to 13.5, so the 14th bag is the one that finishes a yard when you cannot buy a half bag. Bulk delivery is usually cheaper once the bed is more than a couple of yards, and the price-per-yard field is there for that quote.
How do I measure a bed?
- Rectangle: length times width of the bed, not of the whole yard.
- A bed around a tree: measure the ring as a circle using the outer diameter, then subtract the open circle you leave around the trunk. Run the calculator twice and subtract the cubic yards.
- A border along a fence: a long rectangle. Measure the width of the bed, not the property line.
- Curves: a 5 to 10 percent allowance covers the extra you use working around edges. The sample bed uses 0 percent because it is a clean rectangle.
What does the example in the form come out to?
A 9 by 12 foot bed at 3 inches is 108 square feet. That depth is exactly one quarter of a foot, and 108 square feet times 0.25 feet is 27 cubic feet, which is1 cubic yard. With the allowance at0 percent, the order stays1 cubic yard:13.5 bags of 2 cubic feet (14 to buy) or9 bags of 3 cubic feet.
The weight in the result is a hauling check, not the way mulch is sold. Shredded hardwood varies from about 400 to 800 pounds per cubic yard with moisture and fines. The preset uses 22 pounds per cubic foot, about 600 pounds per yard, in the middle of that band. Bark nuggets are lighter. Confirm a heavy, wet load against the payload sticker in the truck.
What are the common questions?
How much mulch do I need?
Multiply the bed area in square feet by the depth in inches, then divide by 324 to get cubic yards. A 9 by 12 foot bed at 3 inches is exactly 1 cubic yard, which is 27 cubic feet.
How many bags of mulch are in a cubic yard?
A cubic yard is 27 cubic feet. That is 13.5 bags of 2 cubic feet, so you buy 14 if the store sells only whole bags, or 9 bags of 3 cubic feet exactly. The calculator rounds each bag size up on its own.
How deep should mulch be?
Extension guidance for trees and shrubs is generally 2 to 4 inches, and less than that on poorly drained soil or with fine shredded mulch. Keep the mulch off the trunk so the root flare stays visible. Penn State Extension, Iowa State University Extension, and University of Illinois Extension all describe this depth and warn against piling mulch against the bark.
Should I remove old mulch before adding more?
If the layer already there is still near the right depth, rake it to break up a crust instead of stacking a fresh 3 inches on top. Measure what is in place and enter only the depth you still need to add. The calculator estimates the depth you type.
Does mulch need a compaction allowance?
No. Mulch is not compacted the way a gravel base is. The allowance is for odd edges and spillage. The form opens at 0 percent so the sample bed is a clean cubic yard. Use 5 to 10 percent for a bed with curves or a lot of tree trunks to work around.
What does this calculator refuse to decide?
It estimates quantity only. Depth, compaction, and whether a load will fit a truck stay with you or your supplier.
- Results are ordering estimates from the formulas on this page. They are not a driveway design, a drainage plan, or a planting specification.
- The allowance is a percent you choose. It is not a measured waste total for a particular job.
- Preset densities are planning figures. A wet load can weigh more. Use the supplier figure when you have one.
- Bag and pallet counts round up. They are not a promise that a yard or a farm will split a unit.
- Prices are material estimates from the numbers you type. Delivery, tax, and labor are separate.
The disclaimer states the same limit for every calculator. Check the order with your supplier before you buy.