United States · feet and inches · US dollars

Gravel Calculator

Units
Area shape

Length and width are the two sides of the area you will cover.

Decorative cover is often 2 to 3 inches. A driveway base is thicker. The depth guide below separates those cases.

Extra material for waste and, on base rock, compaction. Ten percent orders 1.10 times the measured volume.

Washed, rounded stone about 3/8 inch. Loose pea gravel is commonly quoted around 93 to 104 pounds per cubic foot. 100 is the planning midpoint.

Price, optional

Each price is its own estimate for this order. Delivery and tax are separate. Prices stay in US selling units: cubic yards, short tons, and bags.

Results update as you type. The measurements start as a worked example.

Results

About 0.81 cubic yards of pea gravel: 22 cubic feet, or 1.1 short tons.

Cubic yards
0.81
Cubic feet
22
Short tons
1.1
Square feet
120
Cubic meters
0.623
Metric tonnes
0.998
0.5 cu ft bags
44
50 lb bags
44

Before the 10% allowance: 0.74 cubic yards (20 cubic feet).

Volume bags are counted from cubic feet. Weight bags are counted from the order weight, so they change when you edit the density. Counts round up to a whole bag.

Material cost

Add a price per cubic yard, short ton, or bag to estimate material cost.

Working

  1. Area = 12 ft × 10 ft = 120 sq ft.
  2. Depth = 2 in ÷ 12 = 0.1667 ft.
  3. Net volume = 120 sq ft × (2 ÷ 12) ft = 20 cu ft (0.74 cu yd).
  4. Allowance = 10%, so order volume = 20 cu ft × 1.1 = 22 cu ft (0.81 cu yd).
  5. Density = 100 lb/cu ft (1,602 kg/cu m), or 1.35 short tons per cubic yard.
  6. Weight = 22 cu ft × 100 lb/cu ft ÷ 2,000 = 1.1 short tons (0.998 metric tonnes).
  7. 0.5 cu ft bags: 22 ÷ 0.5 = 44 bags.
  8. 50 lb bags: 2,200 lb ÷ 50 lb = 44 bags.
  9. Metric equivalent: 0.623 cubic meters.

Formulas, densities, and sources

How much gravel do I need?

Multiply the area in square feet by the depth in inches, then divide by 324. That quotient is the cubic yards before any allowance. One cubic yard is 27 cubic feet. Short tons follow the density you enter, using 2,000 pounds per ton. Bag counts round up to a whole bag.

How do I use this gravel calculator?

  1. Choose a rectangle, circle, or triangle and enter the sides. Switch to metric if you measured in meters and centimeters.
  2. Enter the depth and the allowance percent. Ten percent orders 1.10 times the measured volume.
  3. Choose a material or type the density from the supplier. Add a price only when you want a material estimate.

How do I measure the area?

Use the outside edges of the area that will actually receive stone. Edging and fabric do not change the volume, but they do change where you stop measuring.

How deep should the gravel be?

Enter the loose thickness you want delivered. Walking, raking, and compacting make the finished layer thinner than that number. The allowance is where you account for the difference.

One cubic yard spread 1 inch deep covers 324 square feet. Divide 324 by the depth in inches to get the coverage of one yard. At 3 inches, one yard covers 108 square feet.

Gravel for 100 square feet, before and after a 10 percent allowance
Loose depthCubic yardsWith 10%
2 inches0.620.68
3 inches0.931.02
4 inches1.231.36
6 inches1.852.04

What formula turns the measurement into yards and tons?

Area in square feet times depth in feet is cubic feet. Divide by 27 for cubic yards. The same volume is square feet times depth in inches, divided by 324, because one cubic yard spread 1 inch deep covers 324 square feet. Short tons are cubic feet times pounds per cubic foot, divided by 2,000. The methodology lists each density and its source.

How do yards, tons, and bags relate?

Pea gravel and river rock start at 100 pounds per cubic foot, which is1.35 short tons per cubic yard. Crushed stone starts at the dry-gravel figure of 105 pounds per cubic foot, about1.42 short tons per yard. Wet gravel is heavier. Themethodology page lists the source for each preset. If the supplier printed a pounds-per-cubic-foot or tons-per-yard number, type that in. Choosing a material again replaces an edited density.

A half cubic foot bag is the common small bag of pea gravel and river rock. There are 54 of them in a cubic yard. Some stone is sold in 50 pound bags. That count uses the density in the form, so editing the density changes the 50 pound count and leaves the half-cubic-foot count alone.

The price boxes are separate ways to buy the same order: by the cubic yard, by the short ton, or by the bag. A quarry ticket and a garden-center bag are different purchases.

What does the example in the form come out to?

A 12 by 10 foot area at 2 inches is 120 square feet. Two inches is 2 ÷ 12 feet, so the net volume is 20 cubic feet, or0.74 cubic yards. A 10 percent allowance brings the order to 22 cubic feet (0.81 cubic yards). At 100 pounds per cubic foot that is 1.1 short tons, 44 bags of 0.5 cubic feet, and 44 bags of 50 pounds. It is a reasonable surface for a small landing, not a driveway section.

What are the common questions?

How many cubic yards of gravel do I need?

Multiply the area in square feet by the depth in inches, then divide by 324. A 12 by 10 foot area at 2 inches is 20 cubic feet, or 0.74 cubic yards, before any allowance. The calculator then multiplies by 1 plus your waste and compaction percent.

How much does a cubic yard of gravel weigh?

It depends on the stone and how wet it is. This calculator uses 100 pounds per cubic foot for pea gravel and river rock, which is 1.35 short tons per cubic yard, and 105 pounds per cubic foot for dry crushed stone, about 1.42 short tons. The Engineering Toolbox lists wet gravel at 125 pounds per cubic foot. Replace the density with your supplier’s figure when you have one.

Is a ton of gravel the same as a cubic yard?

No. A short ton is 2,000 pounds, and a cubic yard is 27 cubic feet. Those match only when the material weighs about 74 pounds per cubic foot, which is lighter than ordinary gravel. At the pea-gravel preset, one cubic yard is 1.35 short tons, so one ton is about 0.74 cubic yards.

How many 0.5 cubic foot bags are in a cubic yard of gravel?

Fifty-four. A cubic yard is 27 cubic feet, and 27 divided by 0.5 is 54. The calculator rounds up when the order is not an even number of bags. The sample 12 by 10 foot area with a 10 percent allowance is 22 cubic feet, which is 44 half-cubic-foot bags.

How deep should a gravel driveway be?

Thicker than a decorative bed. A residential gravel driveway is usually a compacted base of crusher run or similar dense-graded stone, often several inches, plus a thinner surface of cleaner stone. Calculate each layer on its own. Two or three inches is a path or a surface layer, not a base that will carry a car.

Should I add extra gravel for compaction?

For a decorative layer, a small allowance covers spillage and thin spots. For base that will be compacted, the finished thickness is less than the loose thickness on the truck, so the allowance has to cover that difference. Ten percent means the order is 1.10 times the measured volume. A contractor who specifies a compacted depth can tell you how much loose stone that depth requires.

What does this calculator refuse to decide?

It estimates quantity only. Depth, compaction, and whether a load will fit a truck stay with you or your supplier.

  • Results are ordering estimates from the formulas on this page. They are not a driveway design, a drainage plan, or a planting specification.
  • The allowance is a percent you choose. It is not a measured waste total for a particular job.
  • Preset densities are planning figures. A wet load can weigh more. Use the supplier figure when you have one.
  • Bag and pallet counts round up. They are not a promise that a yard or a farm will split a unit.
  • Prices are material estimates from the numbers you type. Delivery, tax, and labor are separate.

The disclaimer states the same limit for every calculator. Check the order with your supplier before you buy.